STAERK HYBRID is a non-solvent adhesive and sealant suitable for many applications. Adheres to most common building substrates. Available in a cartridge in white, grey and black.
Moggen-HYBRID Silicon
$8.80 inc. GST
Availability: 100 in stock (can be backordered)
Hitools is an authorized Milwaukee，Maita，Dewalt, Hikoki retail and whole sale dealer as well as wareanty repair center. Join Hitools Members spending only $99+G per year and enjoy the cost sale of all the power tools and 20% further discount for building materials. Festool is also available with membership price. Email to [email protected] or seach HTPM to purchase the special service, become Hitools members and save more.
Available Colors
White
Properties
High Strength – Less Mechanical Fasteners – Indoor / Outdoor – 20y. Guarantee
Showers
- Ideal for bonding plastic shower linings to gypsum plasterboard, fiber cement wall linings or timber
- Sealing and fixing shower liner to shower tray
- Fixing shower tray to floor
- Sealing shower frame to shower liner and shower tray
General Building
- Fixing wall panels, doors, mirrors
- Fixing floor panels
- Bonding polystyrene panels
- Fixing all types of tiles to most substrates
Suitable for
- METAL, ALUMINIUM, STAINLESS STEEL
- WOOD, PVC, MOST PLASTICS
- BRICK, CONCRETE, MORTAR
- STONE, MARBLE , GRANITE
- PORCELAIN, CERAMIC, GLASS
Indoor / Outdoor
HYBRID sealant and adhesive has the best performance in all applications (inside /outside). Designed especially for demanding tasks.
Weatherproof
With excellent UV and water resistance, superior elasticity & adhesion strength we made the toughest weatherproof product on the market.
Hight Strength
Some of the best features of this premium product is its high elasticity and excellent adhesion to most surfaces in your home.
Guarantee
Against cracking, peeling or crumbling under proper usage. We give one of the longest and comprehensive guarantees in the industry.
How to use
Preparation
The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine wet rag or cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.
Application
Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor at an angle corresponding to the joint width. Place the cartridge into the gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or jointer to clean off excess sealant. Staerk Hybrid is not suitable for bonding polyethylene, polypropylene, Teflon, silicon or polystyrene based materials.
Cleaning
Clean while uncured with a turpentine cloth. After hardening remove the silicone sealant mechanically or with a silicone remover.
Health and Safety
- Non Toxicity when cured
- If medical advise is needed have product container and label at hand
- Read label before use
- Gloves and goggles must be worn during application
- If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15mins
- Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor.
- Ensure proper ventilation at workplace or curing area.
- Keep away from children.
Storage
- Protect from freezing, store in a cool dry place at room temperature.
- Product must be used within 24 months of purchase.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.