Name: Simpson SD10112R500 SD Connector Screw For HTT410 x 38mm Class 55 Mechanical Galvanized (500/Pack) for HTT4
SKU: 707392773405
Price: 87.69 NZD
Availability: InStock

Description

Simpson SD10112R500 SD Connector Screw 10 x 38mm Class 55 Mechanical Galvanized (500/Pack)

Options

SD10112R500:500pcs/box

SD10112R100:100pcs/box

The Strong‑Drive^® SD Connector Screw is used with our connectors. Designed to replace nails in certain products, the load-rated Strong‑Drive SD Connector screw has been tested and approved for use in many popular Simpson Strong‑Tie^® products.

In certain applications screws are easier and more convenient to install than nails, and the single-fastener load values achieved by the SD9 and SD10 exceed those of typical 10d common or 16d common nails, respectively. In addition, the galvanised coating makes the Strong‑Drive SD Connector screw ideal for interior and most exterior conditions.

The Strong‑Drive SD Connector screw features an optimised shank, specifically designed for capability with the fastener holes in Simpson Strong‑Tie connectors.

Material

Carbon Steel

Finish

Mechanically Galvanised

Features & Benefits

Specifically designed to replace nails in certain Simpson Strong‑Tie^® connectors, and is the only screw approved for that application
1/4″ Hex Head reduces cam-out for easier installation
Shank is specifically designed to match the fastener holes in Simpson Strong‑Tie connectors
Serrated Threads and Sharp Point make driving easier
Optimised heat treating for ductility and strength

Applications

Simpson Strong‑Tie^® connectors

Model No. Table

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws. Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.
SD9112R100	#9 x 38mm	Serrated Threads	Sharp Point	Mechanically Galvanised	100	1/4” Hex Head
SD9212R100-R	#9 x 64mm				100
SD9212R500					500
SD9212MB					2000
SD10112R100	#10 x 38mm				100
SD10112R500	#10 x 38mm				500
SD10212R100-R	#10 x 64mm				100

Additional information

Weight	1 kg

Reviews

There are no reviews yet.

Be the first to review “Simpson SD10112R500 SD Connector Screw For HTT410 x 38mm Class 55 Mechanical Galvanized (500/Pack) for HTT4”

Cart

Simpson SD10112R500 SD Connector Screw For HTT410 x 38mm Class 55 Mechanical Galvanized (500/Pack) for HTT4