VT-HP300GREY Simpson 300ml C1/C2 Seismic Vinylester Anchor Adhesive
$39.33
or 6 weekly interest-free payments from $6.55 with 
what's this?
Available on backorder
Description
VT-HP® is a high-performance fast cure vinylester resin-based chemical anchor developed for anchoring applications in cracked and non-cracked concrete 20MPa to 50MPa and qualified for use in seismic regions (performance categories C1/C2).
Material
- Vinylester
Base Material
- Normal and Lightweight Concrete (cracked and non-cracked)
- Grout-filled and Hollow Concrete Block (when used with screen tubes)
- Certain un-reinforced masonry applications
Features & Benefits
- Suitable for use in cracked and non-cracked concrete M8 to M30 / rebar Ø8 to Ø32
- Qualified for use in seismic performance categories C1 and C2
- Styrene free, low odour for safe use in confined spaces – VOC Compliant (A+ rating)
- Excellent for use in cold weather conditions or applications where fast cure is required
- Can be used in dry and damp conditions, wet or flooded environments (not sea water)
- Fire rated
- Fits 300ml standard caulking gun or DT300 by Simpson Strong-Tie, easy to dispense
Installation
Note: Refer to product label for hole and cartridge preparation, installation and technical data.
Applications
- Structural Steel
- Steel Columns and Beams, Post Bases, Concrete Columns
- Balcony Extensions
- Post-installed rebar applications
- Threaded Rod Anchoring
- Facades, Safety Barriers
- Fences, Gates, Industrial Garage and Warehouse applications
Approvals
- CE 1404 (meets EU safety, health or environmental requirements).
- ETA – 19/0419 (Threaded Rod and Rebar Concrete C1)
- ETA – 19/0765 (Threaded Rod Masonry C2)
- Fire Rated (R120)
- WRAS Approved Material (Approved for use with Potable drinking water* approval no. 1811567)
Model No. Table
|
Model No. |
Description |
Size |
Box Qty |
|
VH-HP300GREY |
Fast cure vinylester anchoring adhesive (with C1 and C2 ETA Approvals) (Includes 2 mixing nozzles — MN1) |
300ml |
12 |
|
DT300 |
Manual dispensing tool for 300ml cartridges. See product here. |
— |
1 |
|
MN1-RP10 |
Suit 300ml Epoxy Adhesives, Pack of 10. See product here. |
— |
10 |
Specifications
VT-HP Curing Schedule for Concrete and Masonry – Maximum working time and minimum curing time
|
Concrete Temperature |
Gelling/Working Time |
Minimum Curing Time in Dry Concrete |
Minimum Curing Time in Wet Concrete |
|
– 10°C to -6°C* |
90 min |
24 h |
x2 |
|
-5°C to -1°C* |
90 min |
14 h |
x2 |
|
0°C to +4°C* |
45 min |
7 h |
x2 |
|
+5°C to +9°C |
25 min |
2 h |
x2 |
|
+10°C to +19°C |
15 min |
80 min |
x2 |
|
+20°C to +29°C |
6 min |
45 min |
x2 |
|
+30°C to +34°C |
4 min |
25 min |
x2 |
|
+35°C to +40°C |
2 min |
20 min |
x2 |
|
+40°C |
1,5 min |
15 min |
x2 |
- *Resin temperature must be at least 15 Degree’s Celsius
- *All specifications based on supplied mixer
- *Full cure time is 24 hours for dry conditions
- *In wet concrete the curing time must be doubled
Related products
-
-
Nitecore D2 Digi Charger
Original price was: $65.35.$58.82Current price is: $58.82. inc.GSTAdd to cart
Reviews
There are no reviews yet.