Pro Clima 1AR01968 SOLITEX EXTASANA ADHERO® Self-Adhesive Weather Resistive Barrier (SPECIAL BUILDING PAPER FOR COMMERCIAL USING) Roofing

Description

This is the competitive peel＆adhesive underlay both for roofing and wall，the unit price is only half of Vipoushild. Popular for COMMERCIAL use:

SOLITEX EXTASANA ADHERO^® provides the ultimate weather protection layer for your walls and roofs under all conditions. Fully adhered to rigid substrates, SOLITEX EXTASANA ADHERO^® provides ultimate protection to the building from wind, driving rain and other external sources of water, whilst allowing any internal moisture to escape through the vapour permeable, non-porous TEEE layer.

• Fully self-adhered membrane
• Superior UV resistance (180 days exposure)
• Isolates leaks caused by accidental damage or penetrations
• Ultimate resistance against extreme wind gusts
• Ideal for pre-fab systems

IMPORTANT INFORMATION
• This product is designed to withstand up to 180 days UV exposure before cladding is installed.
• This product can withstand exposure to temperatures of up to 100°C and down to -40°C behind external claddings.

PRODUCT DESCRIPTION
SOLITEX EXTASANA ADHERO® is a UV stabilised and tear resistant self-adhesive weather resistive barrier (WRB). A non-porous water resistant TEEE* film is laminated at high temperature between two layers of spun bonded polypropylene with a full solidacrylate adhesive back and siliconized release paper.

WEATHER EXPOSURE
This product is a weather resistive barrier (WRB) and designed to withstand up to 180 days direct exposure to UV and still fulfil the intended use for air and water control. Exterior cladding should be detailed to prevent direct sunlight onto themembrane in service.

APPLICATION NOTES

SOLITEX EXTASANA ADHERO® weather restive barrier for use over rigid wall sheathing with or without a cavity, rigid roof sheathing on pitched roofs, structural insulation panel (SIP) or cross laminated timber (CLT) in accordance with BRANZ Appraisal 989.

SOLITEX EXTASANA ADHERO® has a release paper which is cut 250mm from the top edge for ease of application.
SOLITEX EXTASANA ADHERO® can be used in all NZS 3604 wind zones up to, and including, ‘extra high’ when applied over a suitable rigid substrate