MDM-WEK-DK16 WEKA Core drill (motor | DK1603 | 230V | 10A | 2000W Speed: 900/1900/3900rpm | Core bit range: 20mm-160mm)

Intellitronic – the new electronic system starts the motor by means of a micro controller softly and thus avoids a too high start current. When exceeding the over current threshold the electronic is showing this by a pulsating of the motor. If the operator now decreases the feed power, the motor works normal again. If the operator does not decrease the feed power the electronic switches the motor off after some seconds. After this action the motor can be started immediately. It is not required to wait a time period before starting again like on a thermal motor overload switch. Thus the Intellitronic avoids overload conditions and increases safety, the operators comfort and the motors life time.

EKA professional electric drills offer a high quality standard combined with a maximum in efficiency. They are designed for permanent
and professional operation. They are designed for steady and professional use and achieve a high quality level. In Europe, USA and Asia it
is used from drilling and sawing companies, but also from craftsmen, who prefer a high-quality product.
DK 12 / DK 16 – universal diamond core drilling machine which can be fixed in a drillstand or used as a hand held drill.
All versions offer the following features.
3 – speed gear – Large drilling range (see tech. Data) with easy speed adjustment to each hole diameter.
Oil-bath lubrication – Optimal gear lubrication for high efficiency and durability.
Overload clutch – Protection for operator as well as for machine and tools against mechanical overloads. An indispensable safety element
for hand operated core drills.
Intellitronic – the new electronic system starts the motor by means of a micro controller softly and thus avoids a too high start current. When
exceeding the over current threshold the electronic is showing this by a pulsating of the motor. If the operator now decreases the feed
power, the motor works normal again. If the operator does not decrease the feed power the electronic switches the motor off after some
seconds. After this action the motor can be started immediately. It is not required to wait a time period before starting again like on a
thermal motor overload switch. Thus the Intellitronic avoids overload conditions and increases safety, the operators comfort and the motors
life time.
Leveling aid – Two integrated levels enable exact horizontal and vertical working positioning.
Metal Casing – In relation to plastic cases the aluminum case of WEKA drills is mechanically and thermally more stable and durable.
WEKA and Environment – WEKA electric tools are mainly made of steel and aluminum. Plastics are only used if it is unavoidable. Sandwich
material is not used. WEKA electric tools are durable. Scrap-mature machines will be taken to pieces completely and the material is
separated. Therefore the machines are 95% recyclable.
Electrical Safety – The DK 12 / DK 14 / DK 16 / DK 18 correspond to the regulations of the European directives as well as to the European
standard EN 50144-2-1 respectively EN 61029-1. They are designed in double insulation with additional earth wire.

Specifications