The M18 FUELTM 1⁄2” High Torque Impact Wrench w/ Friction Ring provides maximum power density and greater access in tight spaces, maximising productivity through faster bolt removal speeds. The POWERSTATETM Brushless Motor delivers up to 1,220Nm of Fastening Torque and 1,490Nm of Nut-Busting Torque when paired with the M18TM REDLITHIUMTM FORGETM 6.0Ah Battery, while the compact size at 185.4mm in length gives users greater access in tight spaces. The new battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4- Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFFTM control applies no more than 68Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The 1⁄2” Friction Ring design allows for quick & tool-free socket changes.
Features:
- With up to 1,627 Nm of fastening torque and 2,170 Nm of nut-busting torque when paired with the FORGE™ 6.0Ah Battery.
- At only 193mm in overall length the M18FHIW2F120 offers improvedaccess in tight spaces.
- Maximum productivity. Users can unlock improved application speeds when pairing thenew REDLITHIUM™FORGE™ 6.0Ah Battery pack (Battery Not Included)
- 4-Mode DRIVE CONTROL provides greater control over output speeds and power, includingAUTO SHUT-OFFand Bolt-Removal Mode
- A new Battery Isolation Systemprovides secure connection and controls vibration transmitted to the battery pack, preventingbattery intermittency (Battery Not Included)
Specifications:
- Platform: M18™
- Anvil Type: 1/2″ Sqaure with Friction Ring
- Fastening Torque: 1,627 Nm
- Nut-Busting Torque: 2,170 Nm
- DRIVE CONTROL: 4 Mode with Auto Shut-Off Mode & Bolt Removal Mode
- No Load RPM: 0-700 / 0-1300 / 0-2000
- Directional No Load RPM:
- Forward: 0-900 RPM
- Reverse: 0-2000 / 0-750 RPM
- IPM: 0-1300 / 0-2200 / 0-2400 / 0-2400
- Tri-LED Workligth: Yes
- Length: 193mm
- Weight: 2.7kg
Warranty:
- 5 Year Warranty Covered By Milwaukee
Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.
Features:
- Charges all Milwaukee batteries up to 40% faster
- Charges all M12 and M18 batteries
- Sequencial charging
- REDLINK intelligence communicates directly with the battery
- REDLINK monitors cell voltage and temperature
- REDLINK charges to optimise the performance, protect and extend the life of the battery
Specifications:
- Voltage: 12V & 18V
- Battery type: Li-ion
- Charge Time:
- 2.0Ah: 26 minutes
- 4.0Ah: 47 minutes
- 5.0Ah: 59 minutes
- 6.0Ah: 75 minutes
- 9.0Ah: 90 minutes
- Weight: 0.77kg
Warranty:
- 2 Years Warranty Covered By Milwaukee
The M18 5.0Ah REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0Ah REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.
This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below -180C). Managed by Milwaukee’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.
Features:
- Powers more than 100 Milwaukee M18 cordless power tools
- REDLINK intelligence provides optimised performance and over load protection
- Best in class construction – offers long lasting performance and durability
- Fuel gauge on board displays remaining run time for less down time on the job
- All weather performance, delivers fade free power in extreme jobsite conditions
Specifications:
- Voltage: 18V
- Capacity: 5.0Ah
- Charge time:
- M12-18FC: 60 mins
- M12-18C: 105 mins
- Weight: 0.72kg
Warranty:
- 2 Years Warranty Covered By Milwaukee
















Reviews
There are no reviews yet.